Product Description
Owing to a modernized infrastructure for trouble-free processing, we are offering AC Telepac Controller, which comes with independent power supplies for each AC & can work with any one or both power supplies. This AC Telepac Controller has inbuilt Voltage & Current sensing in Power supply unit for compressor. Further, it is strictly checked on different quality parameters assuring its flawlessness at user’s end. Features like alarm indication by LED on front panel, direct display of actual room temperature, all faults autoreset, total hour run from installation & room temperature sensing by accurate sensor make this controller more demanding.
- Supply Voltage:
230 VAC ± 15 % for Single Phase 415 VAC ± 15% for Three Phase Separate power supplies for each AC & independent Outputs for Fan & Compressor - Output Contact RatingPer A/C :
1] Single Phase : a] 25 Amps. at 230 VAC for Compressor Output
b] 7Amps. at 230V AC for fan & alarm outputs.
2] Three Phase : a] 9 Amps. at 230 VAC 3 Phase Contactor for Compressor Output
b] 7Amps. at 230V AC for fan & alarm outputs.
- Front Panel : .
1) 16 char X 2 lines LCD display with backlit.
2) 4 Key keypad for programming.
3) Power indication for each AC.
4) AC ON indication for each AC
5) Controller Healthy Indication by Blinking Green LED
6) ALARM indication by Red LED.
- Sensing :
1) Inbuilt Voltage & Current sensing in Power supply unit for compressor.
2) Temperature Sensing by accurate Temp.sensor. 3) Fire Input Sensing
4) DG Mode Sensing
- Terminals : .
1) Power unit for each AC, separate o/ps for 2 Fans &2 Compressors.
2) Temperature sensor.
3) AC1 fail alarm relay o/p.
4) AC2 fail alarm relay o/p.
5) Power fail alarm relay o/p
- Alarms/ Protections : 1) Over voltage protection set point user settable.
2) Under voltage protection set point user settable.
3) Over load protection set point user settable.
4) Under load protection set point user settable.
5) Automatic cut off for smoke/Fire.
6) High/low temperature alarm set point user selectable.
- Power Supply unit : for 3PN & 1 Ph Supply
- Dimensions : .
1) Controller : 245 mm X 150 mm X 60 mm
2)Power supply unit:-125mm X 68mm X168mm